Uusi asiakas ? Tilaa nyt ja saat tuntuvia alennuksia !

Liity nyt jäseneksi ja saat etuja ostosten yhteydessä ! Arvostele meidät Googlessa tai sivuillamme ja osallistut GOLB MEMBER kortin arvontaan !
Uutta: Voimme toimittaa tavarat sovitusti ja tavarat voi maksaa kuskille, lue lisää tästä.

Yli 50€ tilaukset rahtivapaasti !

X
Checker Nitrite HR (tilaustuote)

Checker Nitrite HR (tilaustuote)

(Tilaustuote, varmista toimitusaika asiakaspalvelusta)


Checker®HC Handheld Colorimeter - Nitrite HR

PRIMARY APPLICATIONS:
* Water Quality
* Education
* Aquarium
* Wastewater
* Environmental

FEATURES/BENEFITS:
* Small palm-sized design
* Accurate from ±3 ppm ±5% of reading
* Dedicated to a single parameter
* Uses a single AAA battery
* Auto Power Off after 10 minutes in inactivity
* Built-in timer for timed reaction readings

The HI 708 Checker®HC is a simple, accurate, and cost effective way to measure high ranges of nitrite. Designed as a more accurate alternative to chemical test kits, the HI 708 provides quick, accurate results in four easy steps.

1.) Step One - Add a sample to the included cuvette(s)
2.) Step Two - Insert sample into the Checker and zero it out
3.) Step Three - Remove sample and add reagent
4.) Step Four – Reinsert sample and click the button to measure your results or…
- Press and hold the button for 3 seconds for a time reaction reading

The HI 708 uses an adaptation of the Ferrous Sulfate method. The reaction between nitrite and the reagent causes a greenish/brown tint in the sample.

Order Information:
The HI 708 Checker®HC is supplied with 2 cuvettes and caps, reagent starter kit (6 packets of reagent), 1 X 1.5X AAA battery, and an instruction manual.

Accuracy (@25°C/77°F)±3 ppm ±5% of reading
Dimensions81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)
Environment0 to 50°C (32 to 122°F); RH max 95% non-condensing
Light DetectorSilicon Photocell
Light SourcePhotodiode @575 nm
Measurement MethodColorimetric
MethodAdaptation of the Ferrous Sulfate method. The reaction between nitrite and the reagent causes a greenish/brown tint in the sample.
Power Auto OffAfter 10 min. of inactivity
Power SupplyBattery - 1 x 1.5V AAA
Range0 to 150 ppm
Resolution1 ppm
Weight64 g (2.25 oz.)
  Äänekoski/Nettikauppa   (0)

  Myymälä Oulu   (0)

  Myymälä Jyväskylä   (0)
125.00€ sis. alv
Huom ! Tämä tuote on tilaustuote, joka tilataan varastoomme kun teette tuotteesta tilauksen.
Tuote toimitetaan teille kun tuote on saapunut varastoomme, jos tilaat tämän tuotteen kanssa muita tuotteita tilaus toimitetaan kun tilaustuote on saapunut varastoon. Yleinen toimitusaika tilaustuotteille on 7-30pvä.
Tarkemmat toimitusajat tuotteelle saatte asiakaspalvelustamme.
Lisää ostoskoriin
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)


Checker®HC Handheld Colorimeter - Nitrite HR

PRIMARY APPLICATIONS:
* Water Quality
* Education
* Aquarium
* Wastewater
* Environmental

FEATURES/BENEFITS:
* Small palm-sized design
* Accurate from ±3 ppm ±5% of reading
* Dedicated to a single parameter
* Uses a single AAA battery
* Auto Power Off after 10 minutes in inactivity
* Built-in timer for timed reaction readings

The HI 708 Checker®HC is a simple, accurate, and cost effective way to measure high ranges of nitrite. Designed as a more accurate alternative to chemical test kits, the HI 708 provides quick, accurate results in four easy steps.

1.) Step One - Add a sample to the included cuvette(s)
2.) Step Two - Insert sample into the Checker and zero it out
3.) Step Three - Remove sample and add reagent
4.) Step Four – Reinsert sample and click the button to measure your results or…
- Press and hold the button for 3 seconds for a time reaction reading

The HI 708 uses an adaptation of the Ferrous Sulfate method. The reaction between nitrite and the reagent causes a greenish/brown tint in the sample.

Order Information:
The HI 708 Checker®HC is supplied with 2 cuvettes and caps, reagent starter kit (6 packets of reagent), 1 X 1.5X AAA battery, and an instruction manual.

Accuracy (@25°C/77°F)±3 ppm ±5% of reading
Dimensions81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)
Environment0 to 50°C (32 to 122°F); RH max 95% non-condensing
Light DetectorSilicon Photocell
Light SourcePhotodiode @575 nm
Measurement MethodColorimetric
MethodAdaptation of the Ferrous Sulfate method. The reaction between nitrite and the reagent causes a greenish/brown tint in the sample.
Power Auto OffAfter 10 min. of inactivity
Power SupplyBattery - 1 x 1.5V AAA
Range0 to 150 ppm
Resolution1 ppm
Weight64 g (2.25 oz.)
Arvostelut
Anna pisteet

Nimi:

Jos haluat, voit kirjoittaa vapaamuotoisen arvostelun. Tekstiä voi muokata myöhemmin klikkaamalla tekstiä.







Webshop by: refox.fi - Web design: Digitoimisto Innovators' Club