Nopea toimitus POSTILLA: 1-2 arkipäivässä perillä 95% varmuudella.

Liity nyt MEMBER-jäseneksi ja saat parhaat edut heti !

Tilauksen ollessa +100€ saat valita ilmaisen tuotelahjan, klikkaa tästä !

X
IV-ohjainlaite GSE Humidity & temp. step transformer controller (2fan) 8A (tilaustuote)

IV-ohjainlaite GSE Humidity & temp. step transformer controller (2fan) 8A (tilaustuote)

(Tilaustuote, varmista toimitusaika asiakaspalvelusta)


Askelmuuntajaohjaimella on ominaisuus ettei tuulettimet humise alemmissa nopeuksissa. 

Askelmuuntaja säätelee tuulettimen nopeutta itsestään 6 askelta ylös / alas lämpötilan mukaan. 
 Lämpötila ja hystereesi (herkkyys) voidaan asettaa kahdelle nupille ja kosteus ja kosteushysteesi kahdelle kahdelle nupille.



The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs. The intake fan runs 1step behind the exhaust fan to prevent odour from escaping.

Sample: Exhaust fan runs on step1, intake fan runs on step0 (stop), when the exhaust fan switch to step2 the intake fan switch to step1 etc... until the exhaust fan reach the max. step6 the intake fan will run on step5.

The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistant cover, plugs with flap-lids and a low voltage sensor making it perfect for humid rooms. The sensor comes with a 4meter long cable.



Sizes and technical data's:


Case: WxHxD = 200x250x180mm
Controller: WxHxD = 265x300x205mm
Designed for: 2,5A (for 2fans)
Volts prim: 230V / 50HZ
Volts sec. 80V, 110V, 140V, 170V, 200V, 230V automatic-steps 50HZ
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
humidity accuracy ±4.5%rh
Protection class IP54


Settings range:


Temperature: 20C° - 30C°
Temperature hysteresis: 2-8C°
Humidity: 30% - 100%
Humidity hysteresis: 6%-30%





  Äänekoski/Nettikauppa   (0)

  Myymälä Oulu   (0)

598.00€ sis. alv
Huom !
Tilaustuotteet pitää maksaa kokonaisuudessaan ennakkoon.
Tämä tuote on tilaustuote, joka tilataan varastoomme kun teette tuotteesta tilauksen ja maksat tuotteen.
Tuote toimitetaan teille kun tuote on saapunut varastoomme, jos tilaat tämän tuotteen kanssa muita tuotteita tilaus toimitetaan kun tilaustuote on saapunut varastoon. Yleinen toimitusaika tilaustuotteille on 7-30pvä.
Tarkemmat toimitusajat tuotteelle saatte asiakaspalvelustamme.
Lisää ostoskoriin
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)


Askelmuuntajaohjaimella on ominaisuus ettei tuulettimet humise alemmissa nopeuksissa. 

Askelmuuntaja säätelee tuulettimen nopeutta itsestään 6 askelta ylös / alas lämpötilan mukaan. 
 Lämpötila ja hystereesi (herkkyys) voidaan asettaa kahdelle nupille ja kosteus ja kosteushysteesi kahdelle kahdelle nupille.



The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature. Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs. The intake fan runs 1step behind the exhaust fan to prevent odour from escaping.

Sample: Exhaust fan runs on step1, intake fan runs on step0 (stop), when the exhaust fan switch to step2 the intake fan switch to step1 etc... until the exhaust fan reach the max. step6 the intake fan will run on step5.

The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistant cover, plugs with flap-lids and a low voltage sensor making it perfect for humid rooms. The sensor comes with a 4meter long cable.



Sizes and technical data's:


Case: WxHxD = 200x250x180mm
Controller: WxHxD = 265x300x205mm
Designed for: 2,5A (for 2fans)
Volts prim: 230V / 50HZ
Volts sec. 80V, 110V, 140V, 170V, 200V, 230V automatic-steps 50HZ
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
humidity accuracy ±4.5%rh
Protection class IP54


Settings range:


Temperature: 20C° - 30C°
Temperature hysteresis: 2-8C°
Humidity: 30% - 100%
Humidity hysteresis: 6%-30%





Arvostelut
Anna pisteet

Nimi:

Jos haluat, voit kirjoittaa vapaamuotoisen arvostelun. Tekstiä voi muokata myöhemmin klikkaamalla tekstiä.







Webshop by: refox.fi - Web design: Digitoimisto Innovators' Club