Nopea toimitus POSTILLA: 1-2 arkipäivässä perillä 95% varmuudella.

Liity nyt MEMBER-jäseneksi ja saat parhaat edut heti !

Myymälät suljettuna 29.3.-1.4 välisenä aikana.

Hyvää Pääsiäistä !

Äänekosken myymälä avoinna perjantaina 29.3 klo 10.00 - 11.00

X
IV-ohjainlaite GSE Hysteresis controller 10A (tilaustuote)

IV-ohjainlaite GSE Hysteresis controller 10A (tilaustuote)

(Tilaustuote, varmista toimitusaika asiakaspalvelusta)

GSE Hystesis controlller ohjaa tuulettimet pitämään lämpötilan tasaisena.
Voit säätää sopivan lämpötila haarukan neljästä eri nupista



The Temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one ore more fans. The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistant cover, plugs with flap-lids and a low voltage sensor making it perfect for humid rooms. The sensor comes with a 4meter long cable and can be extended up to 50meters.



Sizes and technical data's:
Case: WxHxD = 130x80x70mm
Controller: WxHxD = 160x100x90mm
VA = 2300W
Volts: 230V / 50HZ
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Protection class: IP54

Settings range:
Temperature: 20C° to 30C°
Minimum speed: off, 20% to -100%
Maximum speed: 100% to -50%
Negative pressure: 100% to -50%





  Äänekoski/Nettikauppa   (0)

  Myymälä Oulu   (0)

179.00€ sis. alv
Huom ! Tämä tuote on tilaustuote, joka tilataan varastoomme kun teette tuotteesta tilauksen.
Tuote toimitetaan teille kun tuote on saapunut varastoomme, jos tilaat tämän tuotteen kanssa muita tuotteita tilaus toimitetaan kun tilaustuote on saapunut varastoon. Yleinen toimitusaika tilaustuotteille on 7-30pvä.
Tarkemmat toimitusajat tuotteelle saatte asiakaspalvelustamme.
Lisää ostoskoriin

(Tilaustuote, varmista toimitusaika asiakaspalvelusta)

GSE Hystesis controlller ohjaa tuulettimet pitämään lämpötilan tasaisena.
Voit säätää sopivan lämpötila haarukan neljästä eri nupista



The Temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one ore more fans. The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistant cover, plugs with flap-lids and a low voltage sensor making it perfect for humid rooms. The sensor comes with a 4meter long cable and can be extended up to 50meters.



Sizes and technical data's:
Case: WxHxD = 130x80x70mm
Controller: WxHxD = 160x100x90mm
VA = 2300W
Volts: 230V / 50HZ
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Protection class: IP54

Settings range:
Temperature: 20C° to 30C°
Minimum speed: off, 20% to -100%
Maximum speed: 100% to -50%
Negative pressure: 100% to -50%





Arvostelut
Anna pisteet

Nimi:

Jos haluat, voit kirjoittaa vapaamuotoisen arvostelun. Tekstiä voi muokata myöhemmin klikkaamalla tekstiä.







Webshop by: refox.fi - Web design: Digitoimisto Innovators' Club