Liity nyt VP-Lux:in jäseneksi ja saat mahtavat edut ostoksien yhteydessä ! Arvostele meidät Googlessa tai sivuillamme ja osallistut LED-valaisimen arvontaan !
ÄÄNEKOSKEN MYYMÄLÄ AVOINNA LAUANTAISIN KLO 13-16 
Toimituskulut vain 3.00€ alle 100€ tilauksiin. Yli 100€ tilauksiin toimitus ilmaiseksi !

X
LED-Kasvivalaisin Secret Jardin TLED Blooming 26W 54CM kukitukseen

LED-Kasvivalaisin Secret Jardin TLED Blooming 26W 54CM kukitukseen

Product detailed description

The LED lighting for the flower is designed for small growing areas with an area of up to 0.8m2 and low drainage. Due to the low calorific value, you can place the TLED 26W fluorescent lamp directly above the plants without the risk of burns. In larger areas, they can be used as an additional source for places that do not get enough light from HPS lamps. TLED 26W LEDs per flower have a total of 144 diodes and are more efficient than TCL or T8 technology, and they have a good life of up to 30,000 hours. The complete package includes, in addition to the tube and the built-in cable, simple hooks and handles that allow both direct and indirect, horizontal and vertical attachment to the construction.

Parameters TLED 26W per flower:

  • Dimensions: 54x4x3cm
  • Weight: 0.36kg
  • Cable length: 240cm
  • Frequency: 50 / 60Hz
  • Consumption: 23W
  • Lifetime: 30,000
  • hours Luminous flux: 2050lm
  • Power: 80lm / W
  • Color temperature: 38 infrared diodes / 38 diodes 2100K / 38 diodes 3000K


Secret Jardin 26w 54cm T-LED Bar Light Footprint over a 1.2m x 1.2m area at a height of 150mm:


How to Use the Secret Jardin T-LED:

The Secret Jardin T-LED Propagation Light is shaped as a long bar. The best way to use it is to position the plants underneath it in a line. Alternatively, they can be used as supplementary lighting by hanging them vertically in the corners of a tent. The unit throws light out from the LEDs in a 120 degree angle. Hung horizontally at least a few inches above the tops of your cuttings/clones then there should be plenty of coverage for at least 2 (in some cases 3) rows of small plants or cuttings. For larger, established plants it will provide adequate light for a minimum of one row. Simply arrange your plants in rows so that the light can cover them adequately and hang the lamp above it with at least a short distance between the bottom of the lamp and the tops of the hightest plants. Connect the mains plug into a mains outlet socket and switch on.

To provide supplementary light in a flowering tent, you can hang the unit(s) vertically in the corners and experience happier and healthier plants!



  Äänekoski/Nettikauppa   (0)

  Myymälä Oulu   (0)

  Myymälä Jyväskylä   (0)
75.00€ sis. alv
Lisää ostoskoriin

Product detailed description

The LED lighting for the flower is designed for small growing areas with an area of up to 0.8m2 and low drainage. Due to the low calorific value, you can place the TLED 26W fluorescent lamp directly above the plants without the risk of burns. In larger areas, they can be used as an additional source for places that do not get enough light from HPS lamps. TLED 26W LEDs per flower have a total of 144 diodes and are more efficient than TCL or T8 technology, and they have a good life of up to 30,000 hours. The complete package includes, in addition to the tube and the built-in cable, simple hooks and handles that allow both direct and indirect, horizontal and vertical attachment to the construction.

Parameters TLED 26W per flower:

  • Dimensions: 54x4x3cm
  • Weight: 0.36kg
  • Cable length: 240cm
  • Frequency: 50 / 60Hz
  • Consumption: 23W
  • Lifetime: 30,000
  • hours Luminous flux: 2050lm
  • Power: 80lm / W
  • Color temperature: 38 infrared diodes / 38 diodes 2100K / 38 diodes 3000K


Secret Jardin 26w 54cm T-LED Bar Light Footprint over a 1.2m x 1.2m area at a height of 150mm:


How to Use the Secret Jardin T-LED:

The Secret Jardin T-LED Propagation Light is shaped as a long bar. The best way to use it is to position the plants underneath it in a line. Alternatively, they can be used as supplementary lighting by hanging them vertically in the corners of a tent. The unit throws light out from the LEDs in a 120 degree angle. Hung horizontally at least a few inches above the tops of your cuttings/clones then there should be plenty of coverage for at least 2 (in some cases 3) rows of small plants or cuttings. For larger, established plants it will provide adequate light for a minimum of one row. Simply arrange your plants in rows so that the light can cover them adequately and hang the lamp above it with at least a short distance between the bottom of the lamp and the tops of the hightest plants. Connect the mains plug into a mains outlet socket and switch on.

To provide supplementary light in a flowering tent, you can hang the unit(s) vertically in the corners and experience happier and healthier plants!



Arvostelut
Anna pisteet

Nimi:

Jos haluat, voit kirjoittaa vapaamuotoisen arvostelun. Tekstiä voi muokata myöhemmin klikkaamalla tekstiä.







Webshop by: refox.fi - Web design: Digitoimisto Innovators' Club