Nopea toimitus POSTILLA: 1-2 arkipäivässä perillä 95% varmuudella.

Liity nyt MEMBER-jäseneksi ja saat parhaat edut heti !

Tilauksen ollessa +100€ saat valita ilmaisen tuotelahjan, klikkaa tästä !


OULUN MYYMÄLÄ PERJANTAINA 26.4 SULKEUTUU KLO 14.00

X
Hanna Groline pH, EC ja TDS mittari HI98131

Hanna Groline pH, EC ja TDS mittari HI98131

Erittäin laadukas Hannan valmistama combo-mittari, jossa samassa mittarissa kaikki tarvittava nesteen mittaukseen.

Tällä yhdellä ja samalla mittarilla voitte mitata pH, EC, lämpötilan ja TDS arvon. Mittari on täysin vedenpitävä, sekä helppo ja nopea kalibroida.

Irroitettava ja helposti vaihdettava pH-elektrodi.

Mukana tulee myös kalibrointiin tarvittavat nesteet.


The HI-98131 is a slim, lightweight, and pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. The

meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).


Features at-a-glance

  • 3 sensors in a single meter: pH electrode with extractable junction, Amperometric EC/TDS sensor, Exposed temperature probe for faster EC/TDS readings

  • Waterproof: Designed to withstand the humidity of a growing environment

  • Wide pH Range: pH range is from 0.00 to 14.00 pH

  • Selectable EC to TDS conversion factor:

Choice of either a 0.5 or 0.7 conversion factor
0.5 (500 CF) conversion factor is for an EC reading of 1000 ?S/cm = 500 ppm
0.7 (700 CF) conversion factor is for an EC reading of 1000 ?S/cm = 700 ppm

Automatic Temperature Compensation
All readings are compensated for variations in temperature. Temperature displayed in oC along with pH, EC or TDS reading
Stability indicator: Meter displays a clock tag that will disappear when the reading has achieved stability
HOLD button: Freezes reading on the display to allow recording of measurement

BEPS (Battery Error Prevention System:
Meter will automatically shut off if there is not enough power to get an accurate measurement

Auto-off:
Selectable time before meter will automatically shuts off to conserve battery life. Options are after 8 minutes, 60 minutes , or disabled.


Ordering Information:
HI-98131 is supplied with HI-73127 pH electrode, HI-73128 electrode removal tool, batteries (4), instructions and quality certificate.



Data sheet:

Accuracy EC±2% F.S.
Accuracy TDS±2% F.S.
Auto-offafter 8 minutes, 60 minutes, disabled
Battery Type / Life1.5V (4) / approx. 100 hours of continuous use, auto-off after 8 minutes of non-use
Dimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0’’)
EC/TDS Calibrationautomatic, one-point at 1.41 mS/cm or 5.00 mS/cm; one point calibration using quick calibration solution
Environment0 to 50°C (32 to 122°F); RH max 100%
pH Accuracy±0.1 pH
pH Calibrationautomatic, at one or two points using standard buffers (pH 4.01, 7.01,10.01); one point calibration using quick calibration solution
pH Range0.00 to 14.00 pH
pH Resolution0.01 pH
Range Conductivity0.00 to 6.00 mS/cm
Range TDS0 to 3000 ppm (500 CF); 0 to 3999 ppm (700 CF)
Resolution EC0.01 mS/cm
Resolution TDS10 ppm (mg/L)
TDS Conversion Factor0.5 (500 ppm) or 0.7 (700 ppm)
Temperature Resolution0.1°C / 0.1°F
Temperature Accuracy±0.5°C /±1°F
Temperature Range0.0 to 60.0°C / 32.0 to 140.0°F
Weight100 g (3.5 oz.)




  Äänekoski/Nettikauppa   (0)

  Myymälä Oulu   (0)

260.00€ sis. alv
Lisää ostoskoriin

Erittäin laadukas Hannan valmistama combo-mittari, jossa samassa mittarissa kaikki tarvittava nesteen mittaukseen.

Tällä yhdellä ja samalla mittarilla voitte mitata pH, EC, lämpötilan ja TDS arvon. Mittari on täysin vedenpitävä, sekä helppo ja nopea kalibroida.

Irroitettava ja helposti vaihdettava pH-elektrodi.

Mukana tulee myös kalibrointiin tarvittavat nesteet.


The HI-98131 is a slim, lightweight, and pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. The

meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).


Features at-a-glance

  • 3 sensors in a single meter: pH electrode with extractable junction, Amperometric EC/TDS sensor, Exposed temperature probe for faster EC/TDS readings

  • Waterproof: Designed to withstand the humidity of a growing environment

  • Wide pH Range: pH range is from 0.00 to 14.00 pH

  • Selectable EC to TDS conversion factor:

Choice of either a 0.5 or 0.7 conversion factor
0.5 (500 CF) conversion factor is for an EC reading of 1000 ?S/cm = 500 ppm
0.7 (700 CF) conversion factor is for an EC reading of 1000 ?S/cm = 700 ppm

Automatic Temperature Compensation
All readings are compensated for variations in temperature. Temperature displayed in oC along with pH, EC or TDS reading
Stability indicator: Meter displays a clock tag that will disappear when the reading has achieved stability
HOLD button: Freezes reading on the display to allow recording of measurement

BEPS (Battery Error Prevention System:
Meter will automatically shut off if there is not enough power to get an accurate measurement

Auto-off:
Selectable time before meter will automatically shuts off to conserve battery life. Options are after 8 minutes, 60 minutes , or disabled.


Ordering Information:
HI-98131 is supplied with HI-73127 pH electrode, HI-73128 electrode removal tool, batteries (4), instructions and quality certificate.



Data sheet:

Accuracy EC±2% F.S.
Accuracy TDS±2% F.S.
Auto-offafter 8 minutes, 60 minutes, disabled
Battery Type / Life1.5V (4) / approx. 100 hours of continuous use, auto-off after 8 minutes of non-use
Dimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0’’)
EC/TDS Calibrationautomatic, one-point at 1.41 mS/cm or 5.00 mS/cm; one point calibration using quick calibration solution
Environment0 to 50°C (32 to 122°F); RH max 100%
pH Accuracy±0.1 pH
pH Calibrationautomatic, at one or two points using standard buffers (pH 4.01, 7.01,10.01); one point calibration using quick calibration solution
pH Range0.00 to 14.00 pH
pH Resolution0.01 pH
Range Conductivity0.00 to 6.00 mS/cm
Range TDS0 to 3000 ppm (500 CF); 0 to 3999 ppm (700 CF)
Resolution EC0.01 mS/cm
Resolution TDS10 ppm (mg/L)
TDS Conversion Factor0.5 (500 ppm) or 0.7 (700 ppm)
Temperature Resolution0.1°C / 0.1°F
Temperature Accuracy±0.5°C /±1°F
Temperature Range0.0 to 60.0°C / 32.0 to 140.0°F
Weight100 g (3.5 oz.)




Arvostelut
Anna pisteet

Nimi:

Jos haluat, voit kirjoittaa vapaamuotoisen arvostelun. Tekstiä voi muokata myöhemmin klikkaamalla tekstiä.







Webshop by: refox.fi - Web design: Digitoimisto Innovators' Club