Heijastin E40 ja DE

Valikoimastamme löydätte hyviä E40-kantaisia heijastimia, sekä DE-kantaisia heijastimia.


Kanta E40 Kanta DE Ilmanvaihtoliitäntä
Heijastin SunSystem 200mm (DE kanta)
Heijastin SunSystem 200mm (DE kanta)
475.00€ 0
Markkinoiden paras heijastin DE-tuplapäätypolttimolle.Heijastinpintana käytetty laadukasta Saksalaista alumiinia jonka heijastavuus jopa 98%.Täysin suljettu ja ilmatiivis kotelointi, sekä saranat helpottaa puhdistusta ja polttimon asennusta. Heijastimella on useita eri patentteja eri maista.Koko: Kokonaispituus: 82cm Heijastimen pituus: 67cm Leveys: 50cm Korkeus: 25cm Huom. Asiakkaan katkaista virtajohto ja itse kytkettävä IEC-pistoke.Lisätietoja valmistajan sivuilta:https://www.sunlightsupply.com/shop/bycategory/sun-system-de-reflectors/ac-de-air-cooled-double-ended-reflector-8-in The patented sealed optic technology allows removal of heat generated by the lamp without cooling the lamp. Made specifically for double-ended horticulture lamps (not included). Features German made, UL listed double-ended sockets. Unique double-ended construction allows for maximum optical efficiency and uniformity. Improved spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/lumen maintenance (up to 90% PAR at 10,000 hours of operation). The AC/DE’s patent pending design allows removal of heat generated by the lamp without cooling the lamp below proper operating temperature. 95% reflective textured German aluminum interior with 98% reflective corner inserts offer excellent uniformity, output and diffusion. Galvanized steel housing with durable powder coated finish. Manufactured with exacting standards. It features double gaskets (between glass & reflector and glass & frame) for an air tight seal. Hinged glass makes changing lamps and cleaning glass easy. 15 ft detachable lamp cord. Comes with built in level for easy, consistent, level hanging. US patents: D698,987, D698,628, D737,498, D726,116, D771,301, D755,722, 9,016,907, 9,335,038. US Patent Pending: 29/579,733, 29/558,123, 29/550,672, 14/701,134. Chinese patents: ZL201330634881.9, ZL201330642281.7. Foreign Patents Pending: 14825888.2 (Europe), 201530400236.X (China), 2014290774 (Australia), 16111238.1 (Hong Kong), 2918776 (Canada).
ESL Heijastin 2 x E40 kanta HORTOSOL
ESL Heijastin 2 x E40 kanta HORTOSOL
120.00€ 0
- Plug & Grow heijastin, joka sopii erityisesti energiansäästöpolttimoille.- E40 kannat ja virtajohto valmiiksi kytkettynä.- Tuuletus ritilät jäähdyttävät polttimoita.(ei tuuletinta)- Ripustuskoukut selkä puolella ketjuja / Easyrollseja varten.- Vankka rakenne kestää painavemmankin polttimon painoa.- Koko: 100 x 50 x 20cmThis reflector from HORTOSOL allows the use of two CFL simultaneously. The reflector is reinforced on the backside and on the lamp holders to cope with the large weight of bulbs. This prevents the usual “hanging down” of heavy energy saving lamps. Thanks to the high-gloss reflector with an excellent reflection, the plants are illuminated evenly and very efficiently. For an excellent heat dissipation, the reflector is equipped with ventilation slots and an integrated axial fan. The fan can be turned on by a separate switch. For easy mounting, there are integrated eyelets on the backside of the reflector. This allows the mounting of Easy Rolls or chains. The reflector is already fully wired and ready for use.Size: 100x50x17 cm (LxWxH)Shape: 3 surfacesMaterial of reflecting sheet: AluminiumFixing: Integrated eyelets for attaching Easy Rolls or chainsLamp holder: 2x E40 – Giant Edison Screw (GES)Connection: Euro Schuko plug and an additional available UK converterUsage: CFL energy saving lamps with integrated ballastPower supply: Two switchable power supply for lamps and fanMaximum load capacity: 2x 1500 gMaximum power: 2x 300 WattManufacturer: HORTOSOLLight efficiencyFor a good light efficiency a high quality reflector is recommended. Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently. We can recommend all reflectors from the brand HORTOSOL.Installation instructionPlease remove the protective film before using. While installation the CFL lamp the power plug must always be unplugged. Screw in the fragile lamps carfully and do not handle them by the glass.
Heijastin Lumatek Pro HAMMERTONE (DE kanta)
Heijastin Lumatek Pro HAMMERTONE (DE kanta)
150.00€ 0
Lumatek Pro DE heijastin on erityisesti suunniteltu ja valmistettu Britaniassa. Heijastin soveltuu ainoastaan 1000W 400V Double-Ended DE Suurpainenatrium lampuille, jotka on markkinoiden ylivoimaisesti tehokkaimpia PAR tehoiltaan ! DE-kanta on valmistettu Saksassa ja heijastimen pintana on käytetty Miro:a joka heijastaa yli 95% valoa. The Lumatek Pro DE reflector has been designed and engineered in the UK specifically for use with1000w 400V Double-Ended (DE) HPS grow lamps; the most efficient lamps in the industry offering the highest PAR output value, currently available. The DE reflector mogul socket is German manufactured and the reflector€™s leaves are available in either 95% reflective Miro or Hammertone aluminium. The reflector comes flat-packed for easier storage and postage and is easily assembled with clear concise instructions. The Lumatek Pro DE reflector is available separately or with the remote Lumatek Pro 1000W 400V dimmable e-ballast and the Lumatek 1000W 400V DE lamp as a complete kit; the best performing horticultural lighting technology at exceptional value and unbeatable prices! The professional 1000W 400V DE (Double-Ended) electronic high frequency HPS horticultural lamps are the most efficient lamps in the industry producing the most amount of PAR  spectrum (grow) light and as such are the number 1 choice for greenhouse & indoor plant cultivation & horticulture professionals! The Lumatek Pro 1000W 400V DE Digital Lighting package makes this system available to the hobby grower by making it compatible with standard 240V mains electricity supply and affordable at exceptional value! Boost your yield with 10% more PAR grow light; more light = more yield!! The system is powered & controlled using a remote Lumatek Pro 1000W 400V fully dimmable electronic ballast which connects to 240V mains supply and drives a 1000W 400V DE HPS lamp producing 2100 micromols/sec PPF (compare to best performing 240V 1000W lamp producing 1850 micromol/sec). There is a choice of reflector material of either Miro or Hammertone aluminium to focus and direct the light spread onto plant canopy. Key Specifications/ Special Features: Designed for use with industry leading 1000W400V DE grow lamps with highest PAR micromol rating Available in 95% reflective Miro or Hammertone Aluminium German-manufactured DE mogul socket Flat packed with easy assembly instructions Rated for lamps up to 1000W Available separately or as 1000W400V lighting kit More light = more yield! Documents
Heijastin E40 Lumatek Turrican Ultra Miro 100cm
Heijastin E40 Lumatek Turrican Ultra Miro 100cm
175.00€ 0
The Turrican Parabolic Designed in partnership between Lumatek Ltd and Qwod has an incredibly even light spread and a design that produces low heat levels directly under the lamp, meaning that it can be lowered further than is often possible when using conventional reflectors without burning the tops of plants. The Turrican uses industry-leading state-of-the-art reflective medium 'Miro' with 95%reflectivity, rated for lamps up to 1000Watts. Key Specifications/ Special Features: Superb, uniform light spread Constructed from premium grade components Eliminates hotspots Supplied with IEC lead for simple connection to ballasts Vented top section to reduce heat build-up Can position close to top of plant canopy Highly reflective Miro finish 95% reflectivity Can be used with both CFLs and HID lamps 37cm high x 100cm diameter for excellent coverage Packaged in flat packs €“ easier to store and deliver Clear concise instructions for easy assembly Rated for lamps up to 1000Watts The Turrican Parabolic - Miro Reflector 100cm Diameter Contains: 8 x Miro reflector leaf panels, 1 x bag of assorted nuts bolts and washers, 1 x E40 lamp holder, 1 x top plate. How the Turrican Parabolic - Miro Reflector 100cm Diameter Works:The Turrican Parabolic is a curved reflector that houses your HID lamp via its supplied E40 lamp holder. What differentiates the Turrican from cheap alternatives on the market is the high-quality feel of its components - the Turrican is engineered from materials that won't degrade quickly (reducing efficiency) like those of its competitors, delivering excellent results consistently over long periods of time. Unlike most other reflectors, the lamp in this unit is mounted vertically and the majority of its output is directed sideways towards curved surfaces and reflected back down towards the canopy. This method creates a more uniform spread of light than when using horizontally mounted lamps. Naturally, an even light spread leads to a more even canopy, adding consistency when growing larger numbers of plants in a given area. These effects are all enhanced greatly by the Turrican's 'Miro' finish, which helps eliminate hot-spots, an issue that occurs when light is too highly concentrated in a particular area.It also features vents around the lamp holder to allow heat to escape through the top of the reflector. This, combined with the reflector's open design, means that temperatures directly under the lamp are much lower than those under other reflectors, meaning that the Turrican can be positioned closer to the top of plants without causing burning.The Turrican is supplied with a 375cm power cable with an IEC (kettle lead) connection. The IEC adapter is used to connect to a ballast of a suitable output for the lamp fitted to the reflector, up to 1000Watts.
Heijastin E40 Hortosol Cooltube 200mm
Heijastin E40 Hortosol Cooltube 200mm
140.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 69x68x24 cm (LxWxH)Connection-Ø: 200 mm – (8?)Shape: 17-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 3.5 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 1000 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended. Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently. We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged. Screw in the lamps carfully and do not handle them by the glass.
Heijastin DE Solismax56 leveä
Heijastin DE Solismax56 leveä
145.00€ 0
Uusi leveämpi malli !Koko: 51cm x 34.5cm x 18cm Valmis 3m IEC-johto.The compact and versatile SolisTek SolisMax56 Double Ended ReflectorThe SolisTek SolisMax56 Double Ended Reflector is the only reflector that can use both the 600w and 1000w double ended lamps, making it unique and incredibly versatile. With its lightweight yet sturdy design and impressive lighting footprint, the SolisTek SolisMax56 Double Ended Reflector illuminates a large area for its comparatively small size. Using its high quality 95% reflective German aluminium inner casing, it focuses as much light as possible down towards the canopy. The SolisTek SolisMax56 Double Ended Reflector combines with the SolisTek Lighting Range to provide your plants with as much high quality, plant usable light as possible.Perfect for both small and large scale grow areasCan be used with either 600w or 1000w double ended lampsCombines perfectly with the SolisTek Matrix Ballast if using a double ended 600w lampIlluminates a massive footprint of light up to 5' x 6' square foot Uses 95% reflective German aluminiumSmall, compact and lightweight designHighly conductive, tinned AWG wire that doesn't oxidize, prolonging the reflectors lifespanRFI shieldedContains:1 x SolisTek SolisMax56 Double Ended ReflectorDimensions:51cm x 34.5cm x 18cmPower cord length:4.5 metersHow the SolisTek SolisMax56 Double Ended Reflector works:The SolisTek SolisMax56 Double Ended Reflector is an incredibly versatile reflector, the fact you can switch between 600w and 1000w double ended lamps set it apart from the competition. It forms a perfect pairing with the SolisTek Matrix Ballast if your using it with 600w double ended lamps. The SolisTek SolisMax56 Double Ended Reflector creates a very even lighting footprint utilizing high-grade German aluminium. The SolisTek SolisMax56 Double Ended Reflector can be used with high pressure sodium (HPS) or metal halide (MH) double ended lamps. With it's lightweight and compact design it fits into virtually any sized room or grow tent, either as a standalone unit or used in sequence over a larger growing area.When Do I Switch Between Lamps?SolisTek have created a range of lamps, harnessing a spread of lighting spectrums to compliment every period of a plants life cycle. From the earliest seedlings stages, through to late flower, helping you produce the best possible results every time. The veg weeks and flowwring weeks illustrated below are for guidence only.Veg Week 1-8: Begin with the SolisTek 6K Blue Lamp for your seedlings, rooted cuttings and young plants, as this lamp promotes bushy, dense growth with tight internodes. The SolisTek 6K Blue is high in blue, purple and green light, making it excellent for all your vegging needs. Use until a couple of weeks before you're ready to flower (depending on how long you're vegging for, typically 4-8 weeks).Flowering Week 1-2: Two weeks into flowering switch to the SolisTek 4K Daylight Lamp, which is higher in green and yellow light whilst still containing large amounts of purple and blue light, making it a full spectrum lighting source similar to sunlight. The SolisTek 4K Daylight still promotes healthy, upward growth while increasing essential oil content as the first flower sets form.Flowering Week 3-7: Switch to the SolisTek 2K HPS Lamp as your primary light for most of the flowering period. High in yellow, orange and red light the SolisTek 2k HPS Lamp stimulates rapid, heavy flowering formation.Flowering Week 8-9: One or two weeks prior to harvest switch out the SolisTek 2k HPS Lamp and replace it with the SolisTek 10K Finisher Lamp. The SolisTek 10K Finisher Lamp has a unique spectrum. Very high in UV and deep blue light its especially useful when used on plants deep into flower, as it promotes increased essential oil production on your heavy-set flowers, further adding quality to your end product.How to use the SolisTek SolisMax56 Double Ended Reflector:The SolisTek SolisMax56 Double Ended Reflector is designed for use with any horizontally mounted HPS or MH double ended lamp ideally using the double ended lamps from the SolisTek range. Simply hang the reflector over the centre of the grow space at an appropriate height using easy rolls or jack chain. Holding your lamp with a clean cloth insert the double ended lamp into the lamp holder with the end illustrated below closest to the wired end of the reflector and fix in firmly. Plug the lead into an appropriate ballast and switch on.Warning: When HID lamps are switched on they run extremely hot. As with all high-pressure sodium and metal halide bulbs it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.
Heijastin E40 Hortosol Cooltube 150mm
Heijastin E40 Hortosol Cooltube 150mm
65.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 49x25x20 cm (LxWxH)Connection-Ø: 150 mm – (6?)Shape: 5-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 2.5 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 600 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended. Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently. We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged. Screw in the lamps carfully and do not handle them by the glass.
Heijastin E40 Hortosol Cooltube 125mm
Heijastin E40 Hortosol Cooltube 125mm
55.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 40x20x13 cm (LxWxH)Connection-Ø: 125 mm – (5?)Shape: 8-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 2 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 600 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended.Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently.We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged.Screw in the lamps carfully and do not handle them by the glass.
Heijastin E40 Turrican Lumatek valkoinen
Heijastin E40 Turrican Lumatek valkoinen
100.00€ 0
The Turrican Parabolic Designed in partnership between Lumatek Ltd and Qwod has an incredibly even light spread and a design that produces low heat levels directly under the lamp, meaning that it can be lowered further than is often possible when using conventional reflectors without burning the tops of plants. The Turrican is rated for lamps up to 1000Watts.Key Specifications:Superb, uniform light spreadConstructed from premium grade componentsEliminates hotspotsSupplied with IEC lead for simple connection to ballastsVented top section to reduce heat build-upCan position close to top of plant canopyHighly reflective Miro finish 95% reflectivityCan be used with both CFLs and HID lamps37cm high x 100cm diameter for excellent coveragePackaged in flat packs – easier to store and deliverClear concise instructions for easy assemblyRated for lamps up to 1000WattsThe Turrican -  Reflector 100cm Diameter Contains: 8 x Miro reflector leaf panels, 1 x bag of assorted nuts bolts and washers, 1 x E40 lamp holder, 1 x top plate.How the Turrican Parabolic - Reflector 100cm Diameter Works:The Turrican Parabolic is a curved reflector that houses your HID lamp via its supplied E40 lamp holder.What differentiates the Turrican from cheap alternatives on the market is the high-quality feel of its components - the Turrican is engineered from materials that won't degrade quickly (reducing efficiency) like those of its competitors, delivering excellent results consistently over long periods of time. Unlike most other reflectors, the lamp in this unit is mounted vertically and the majority of its output is directed sideways towards curved surfaces and reflected back down towards the canopy. This method creates a more uniform spread of light than when using horizontally mounted lamps. Naturally, an even light spread leads to a more even canopy, adding consistency when growing larger numbers of plants in a given area. These effects are all enhanced greatly by the Turrican's 'Miro' finish, which helps eliminate hot-spots, an issue that occurs when light is too highly concentrated in a particular area.It also features vents around the lamp holder to allow heat to escape through the top of the reflector. This, combined with the reflector's open design, means that temperatures directly under the lamp are much lower than those under other reflectors, meaning that the Turrican can be positioned closer to the top of plants without causing burning.The Turrican is supplied with a 375cm power cable with an IEC (kettle lead) connection. The IEC adapter is used to connect to a ballast of a suitable output for the lamp fitted to the reflector, up to 1000Watts.
Loading...