Etsi

Ilmanvaihtoliitäntä

Heijastin E40 Hortosol Cooltube 125mm
Heijastin E40 Hortosol Cooltube 125mm
55.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 40x20x13 cm (LxWxH)Connection-Ø: 125 mm – (5?)Shape: 8-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 2 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 600 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended.Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently.We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged.Screw in the lamps carfully and do not handle them by the glass.
Heijastin SunSystem 200mm (DE kanta)
Heijastin SunSystem 200mm (DE kanta)
475.00€ 0
Markkinoiden paras heijastin DE-tuplapäätypolttimolle.Heijastinpintana käytetty laadukasta Saksalaista alumiinia jonka heijastavuus jopa 98%.Täysin suljettu ja ilmatiivis kotelointi, sekä saranat helpottaa puhdistusta ja polttimon asennusta. Heijastimella on useita eri patentteja eri maista.Koko: Kokonaispituus: 82cm Heijastimen pituus: 67cm Leveys: 50cm Korkeus: 25cm Huom. Asiakkaan katkaista virtajohto ja itse kytkettävä IEC-pistoke.Lisätietoja valmistajan sivuilta:https://www.sunlightsupply.com/shop/bycategory/sun-system-de-reflectors/ac-de-air-cooled-double-ended-reflector-8-in The patented sealed optic technology allows removal of heat generated by the lamp without cooling the lamp. Made specifically for double-ended horticulture lamps (not included). Features German made, UL listed double-ended sockets. Unique double-ended construction allows for maximum optical efficiency and uniformity. Improved spectrum DE lamps used in this fixture focus on the red component for increased photosynthetic response. They offer improved PAR values and increased PAR/lumen maintenance (up to 90% PAR at 10,000 hours of operation). The AC/DE’s patent pending design allows removal of heat generated by the lamp without cooling the lamp below proper operating temperature. 95% reflective textured German aluminum interior with 98% reflective corner inserts offer excellent uniformity, output and diffusion. Galvanized steel housing with durable powder coated finish. Manufactured with exacting standards. It features double gaskets (between glass & reflector and glass & frame) for an air tight seal. Hinged glass makes changing lamps and cleaning glass easy. 15 ft detachable lamp cord. Comes with built in level for easy, consistent, level hanging. US patents: D698,987, D698,628, D737,498, D726,116, D771,301, D755,722, 9,016,907, 9,335,038. US Patent Pending: 29/579,733, 29/558,123, 29/550,672, 14/701,134. Chinese patents: ZL201330634881.9, ZL201330642281.7. Foreign Patents Pending: 14825888.2 (Europe), 201530400236.X (China), 2014290774 (Australia), 16111238.1 (Hong Kong), 2918776 (Canada).
Heijastin E40 Hortosol Cooltube 200mm
Heijastin E40 Hortosol Cooltube 200mm
140.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 69x68x24 cm (LxWxH)Connection-Ø: 200 mm – (8?)Shape: 17-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 3.5 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 1000 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended. Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently. We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged. Screw in the lamps carfully and do not handle them by the glass.
Heijastin E40 Hortosol Cooltube 150mm
Heijastin E40 Hortosol Cooltube 150mm
65.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 49x25x20 cm (LxWxH)Connection-Ø: 150 mm – (6?)Shape: 5-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 2.5 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 600 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended. Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently. We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged. Screw in the lamps carfully and do not handle them by the glass.
Loading...