Kanta E40

ESL Heijastin 2 x E40 kanta HORTOSOL
ESL Heijastin 2 x E40 kanta HORTOSOL
120.00€ 0
- Plug & Grow heijastin, joka sopii erityisesti energiansäästöpolttimoille.- E40 kannat ja virtajohto valmiiksi kytkettynä.- Tuuletus ritilät jäähdyttävät polttimoita.(ei tuuletinta)- Ripustuskoukut selkä puolella ketjuja / Easyrollseja varten.- Vankka rakenne kestää painavemmankin polttimon painoa.- Koko: 100 x 50 x 20cmThis reflector from HORTOSOL allows the use of two CFL simultaneously. The reflector is reinforced on the backside and on the lamp holders to cope with the large weight of bulbs. This prevents the usual “hanging down” of heavy energy saving lamps. Thanks to the high-gloss reflector with an excellent reflection, the plants are illuminated evenly and very efficiently. For an excellent heat dissipation, the reflector is equipped with ventilation slots and an integrated axial fan. The fan can be turned on by a separate switch. For easy mounting, there are integrated eyelets on the backside of the reflector. This allows the mounting of Easy Rolls or chains. The reflector is already fully wired and ready for use.Size: 100x50x17 cm (LxWxH)Shape: 3 surfacesMaterial of reflecting sheet: AluminiumFixing: Integrated eyelets for attaching Easy Rolls or chainsLamp holder: 2x E40 – Giant Edison Screw (GES)Connection: Euro Schuko plug and an additional available UK converterUsage: CFL energy saving lamps with integrated ballastPower supply: Two switchable power supply for lamps and fanMaximum load capacity: 2x 1500 gMaximum power: 2x 300 WattManufacturer: HORTOSOLLight efficiencyFor a good light efficiency a high quality reflector is recommended. Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently. We can recommend all reflectors from the brand HORTOSOL.Installation instructionPlease remove the protective film before using. While installation the CFL lamp the power plug must always be unplugged. Screw in the fragile lamps carfully and do not handle them by the glass.
Heijastin E40 Lumatek Turrican Ultra Miro 100cm
Heijastin E40 Lumatek Turrican Ultra Miro 100cm
175.00€ 0
The Turrican Parabolic Designed in partnership between Lumatek Ltd and Qwod has an incredibly even light spread and a design that produces low heat levels directly under the lamp, meaning that it can be lowered further than is often possible when using conventional reflectors without burning the tops of plants. The Turrican uses industry-leading state-of-the-art reflective medium 'Miro' with 95%reflectivity, rated for lamps up to 1000Watts. Key Specifications/ Special Features: Superb, uniform light spread Constructed from premium grade components Eliminates hotspots Supplied with IEC lead for simple connection to ballasts Vented top section to reduce heat build-up Can position close to top of plant canopy Highly reflective Miro finish 95% reflectivity Can be used with both CFLs and HID lamps 37cm high x 100cm diameter for excellent coverage Packaged in flat packs €“ easier to store and deliver Clear concise instructions for easy assembly Rated for lamps up to 1000Watts The Turrican Parabolic - Miro Reflector 100cm Diameter Contains: 8 x Miro reflector leaf panels, 1 x bag of assorted nuts bolts and washers, 1 x E40 lamp holder, 1 x top plate. How the Turrican Parabolic - Miro Reflector 100cm Diameter Works:The Turrican Parabolic is a curved reflector that houses your HID lamp via its supplied E40 lamp holder. What differentiates the Turrican from cheap alternatives on the market is the high-quality feel of its components - the Turrican is engineered from materials that won't degrade quickly (reducing efficiency) like those of its competitors, delivering excellent results consistently over long periods of time. Unlike most other reflectors, the lamp in this unit is mounted vertically and the majority of its output is directed sideways towards curved surfaces and reflected back down towards the canopy. This method creates a more uniform spread of light than when using horizontally mounted lamps. Naturally, an even light spread leads to a more even canopy, adding consistency when growing larger numbers of plants in a given area. These effects are all enhanced greatly by the Turrican's 'Miro' finish, which helps eliminate hot-spots, an issue that occurs when light is too highly concentrated in a particular area.It also features vents around the lamp holder to allow heat to escape through the top of the reflector. This, combined with the reflector's open design, means that temperatures directly under the lamp are much lower than those under other reflectors, meaning that the Turrican can be positioned closer to the top of plants without causing burning.The Turrican is supplied with a 375cm power cable with an IEC (kettle lead) connection. The IEC adapter is used to connect to a ballast of a suitable output for the lamp fitted to the reflector, up to 1000Watts.
Heijastin E40 Hortosol Cooltube 125mm
Heijastin E40 Hortosol Cooltube 125mm
55.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 40x20x13 cm (LxWxH)Connection-Ø: 125 mm – (5?)Shape: 8-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 2 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 600 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended.Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently.We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged.Screw in the lamps carfully and do not handle them by the glass.
Heijastin E40 Hortosol Cooltube 150mm
Heijastin E40 Hortosol Cooltube 150mm
65.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 49x25x20 cm (LxWxH)Connection-Ø: 150 mm – (6?)Shape: 5-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 2.5 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 600 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended. Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently. We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged. Screw in the lamps carfully and do not handle them by the glass.
Heijastin E40 Hortosol Cooltube 200mm
Heijastin E40 Hortosol Cooltube 200mm
140.00€ 0
HPS/MH bulbs reach operating temperatures over 300° Celsius and as a consequence the ambient temperature is raising too much. To avoid this heat problem HORTOSOL specifically designed the Cooltube reflector for the use of HPS/MH lamps. At this light fixture the bulb is installed in a glass tube, which will be connected with a ventilation system. Thanks to this heat dissipation, the lamp can be positioned closer to the plants, with the result of higher light output and depth effect.On the basis of the hammered reflector with high reflection, the plants are illuminated evenly and very efficiently. The removable reflector allows vertical use in 360° mode, too.For an easy installation, the reflector comes with integrated eyelets for attaching hanging equipment like Easy Rolls or chains. All Cooltubes from HORTOSOL are already assembled with a 4m long power cable with IEC-plug for connection to the ballast.Dimension: 69x68x24 cm (LxWxH)Connection-Ø: 200 mm – (8?)Shape: 17-surfacesMaterial of glass tube: Borosilicate glassThickness of glass tube: 3.5 mmMaterial of reflecting sheet: AluminiumMaterial of connecting flange: AluminiumFixing: integrated eyelets for attachingLamp holder: E40 – Giant Edison Screw (GES)Power plug: 4m IEC cable for connection to a ballastUsage: HPS, MH – (additional ballast required!)Maximum load capacity: 1500 gMaximum power: 1000 WattManufacturer: HORTOSOLLight efficiency:For a good light efficiency a high quality reflector is recommended. Please use a reflector with high light reflexion. This will focuse the light and illuminate your plants very well and efficiently. We can recommend all reflectors from the brand HORTOSOL.Installation instruction:Please remove the protective film before using. While installation the lamp the power plug must always be unplugged. Screw in the lamps carfully and do not handle them by the glass.
Loading...