Checker Chromium VI High Range (tilaustuote)
125.00€
0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)Checker® Chromium VI High RangeEasier to use and more accurate than chemical test kits Diphenylcarbohydrazide method Accuracy ±5 ppb ±5% of reading 1 ppb (µg/L) resolution Large, easy to read digits Auto shut offDedicated to a single parameter Designed to work with HANNA’s powder reagents Uses 10 mL glass cuvettesSmall size, big convenience Weighing a mere 64 g (2.25 oz.), the Checker®HC easily fits into the palm of your hand or pocket Use for quick and accurate on the spot analysis Single button operation: zero and measure Operated by a single AAA batteryVideo, How to do the testIdeal for Water QualityThere are two natural forms of ionic chromium, the hexavalent ion, Cr (VI) and the trivalent Cr (III). Cr (III) is much less toxic than Cr (VI) and seldom found in potable waters. Cr (VI), however, is toxic to humans and is found in water. Even though the toxic effects from Cr (VI) in drinking water are not well documented, it is a suspected carcinogen. The maximum permissible level or Cr (VI) allowed to be released into the waterways is 50 ppb. Its level in drinking water is normally much lower and a lever higher than 3 ppb is suggestive of industrial pollution.By monitoring this parameter with the HANNA HI 723 Checker®HC, serious health and safety risks can be avoided.The HI 723 Checker®HC is extremely simple to use. First, zero the instrument with your water sample. Next, add the reagent, shake vigurosly for 10 seconds. Last, place the vial into the Checker®HC, press the operational button for about 3 seconds and the display will show the countdown prior to the measurement or, alternatively, wait for 6 minutes and press operational button. When the timer ends the meter will perform the reading. The Checker®HC displays concentration in ppb of chromium VI. It’s that easy.Order Information: HI 723 Checker®HC is supplied with sample cuvettes with caps (2 ea.), power reagents for chromium VI HR (6), battery and instructions.Accuracy @ 25°C±5% of reading ±5 ppbAuto-offafter ten minutes of non-useBattery Type(1) 1.5V AAADimensions81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)Environment0 to 50°C (32 to 122°F); RH max 95% non-condensingLight DetectorSilicon PhotocellLight SourceLED @ 525 nmMethodadaptaion of the ATSM, Manual of Water and Enviornmental Technology, D 1687-92, Diphenylcarbohydrazide methodRange0 to 999 ppbResolution1 ppbWeight64 g (2.25 oz.)
