Yli 25.00€ tilauksiin toimituskulut vain 2.90€ ! Arvostele ostamasi tuote ja voit voittaa 25€ arvoisen lahjakortin ! 


Etsi

HannaNorden

EC/TDS/Temp tester High range (tilaustuote)
EC/TDS/Temp tester High range (tilaustuote)
179.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)DiST®6 EC/TDS/Temperature Tester high range measurementWater resistent and it floats!High accuracyAutomatic calibration and temperature compensationHOLD functionBEPS (Battery Error Prevention System)When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST's ease of use, in combination with its affordability made it the standard in EC and TDS measurement. HANNA continues the standard in EC and TDS testing with the DiST®6.This tester includes features such as: a replaceable graphite electrode, adjustable TDS ratio, °C or °F measurement, Automatic Temperature Compensation (ATC) with adjustable ?, battery level indicator, stability indicator, automatic shut-off and automatic calibration.The graphite conductivity electrode provides greater accuracy because it resists contamination by salt deposits in the sample.All of these features are packed in a floating, water resistent casing. This 3-in-1 tester is unmatched in EC/TDS/ temperature measurements.Order Information:I 98312 (DiST 6) is supplied with HI 73311 EC/TDS probe, HI 73128 probe removal tool, batteries and instructions.Accuracy EC±2% F.S.Accuracy TDS±2% F.S.Accuracy Temperature±0.5°C / ±1°FBattery Type / Life4 x 1.5V with BEPS / approx. 100 hours of continuous use, auto-off after 8 minutes of non-useCalibrationautomatic, 1 pointDimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0")Environment0 to 50°C (32 to 122°F); RH max 100%Range EC0.00 to 20.00 mS/cmRange TDS0.00 to 10.00 pptRange Temperature0.0 to 60.0°C / 32 to 140.0°FResolution EC0.01 mS/cmResolution TDS0.01 pptResolution Temperature0.1°C / 0.1°FTDS Conversion Factoradjustable from 0.45 to 1.00Temperature CompensationAutomatic, with ß adjustable from 0.0 to 2.4% / °CWeight100 g (3.5 oz.)
EC/Temp tester GroLine Direct Soil EC Tester (tilaustuote)
EC/Temp tester GroLine Direct Soil EC Tester (tilaustuote)
157.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)The Soil Test™ Direct Soil EC Tester - HI98331 is a rugged and reliable pocket-sized tester that offers quick and accurate readings. The Soil Test™ Direct Soil EC Tester - HI98331 features a stainless steel penetration probe for direct measurement of conductivity in soils. With a compact size, single button operation, and automatic calibration, Soil Test is an excellent choice for taking direct conductivity measurements in soil.Waterproof4.5" stainless steel penetration electrodeAutomatic Temperature CompensationDetailsThe HI98331 features a stainless steel penetration electrode that provides the ability to take direct measurements in soil. When calibration is needed, simply submerge the electrode tip into calibration solution and and enter calibration mode for automatic 1 point calibration.Electrolytic conductivity, abbreviated as EC, is a measurement made in which electrical charges of particles in a medium are moved under the influence of a potential difference. EC is a measure of concentration, however, it is non-specic for ion type. An ion is a charged particle present in the solution that contributes to the current flow. Ions are formed when a salt such as sodium chloride is dissolved in water to form particles having electrical charges. Sodium chloride, separates into Na+ and Cl-Electrical conductance, the ability of a substance to conduct an electrical current is the reciprocal of electrical resistance. “Conductance” and “Resistance” depend on the geometrical dimensions of the substance being measured. Conductivity and resistivity are “normalized” terms that are used to denote a bulk intrinsic property of a substance. This is the measurement a standardized EC probe on a Conductivity or resistivity meter provides. Conductivity measurements can be used to provide additional industry specific measurements; TDS, Salinity and USP compliant conductivity. Many of Hanna’s meters provide these measurements also.Features at-a-glance:One-point calibrationAutomatic calibration to 1413 µS/cm conductivity standardAutomatic Temperature Compensation (ATC)Samples automatically compensated for temperature variationsUses a fixed 2%/oC temperature correction coefficientStainless steel penetration electrodeAllows for direct measurement in soilOrdering Information: HI98331 is supplied with a stainless steel penetration probe, batteries, and instrument quality certificate.Accuracy EC±50 ?S/cm (0 to 2000 ?S/cm), ±300 ?S/cm (2000 to 4000 ?S/cm); ±0.05 mS/cm (0.00 to 2.00 mS/cm), ±0.30 mS/cm (2.00 to 4.00 mS/cm)Battery Type / LifeCR2032 Li-ion approximately 100 hours of continuous useDimensions50 x 196 x 21 mm (2.0 x 7.7 x 0.9“)EC/TDS Calibrationautomatic, one-point at 1.41 mS/cmElectrode/Probe114 mm (4.5 “) Stainless steel penetrationEnvironment0 to 50°C (32 to 122°F); RH max 95% non-condensingRange Conductivity0 to 4000 ?S/cm; 0.00 to 4.00 mS/cm (dS/m)Resolution Conductivity1 ?S/cm; 0.01 mS/cm (dS/m)Temperature Accuracy±1°CTemperature Compensationautomatic, temperature coefficient (?) fixed 2% / °CTemperature Range0.0 to 50.0°CTemperature Resolution0.1°CWeight74 g (2.4 oz.)
EC/TDS (ppm)/Temp Tester GroLine (tilaustuote)
EC/TDS (ppm)/Temp Tester GroLine (tilaustuote)
78.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)THe HI-98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The HI-98318 has a very large easy to read LCD display that shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.Features at-a-glanceWaterproofFast Automatic Temperature Compensation with exposed temperature probeGraphite sensors that reduce polarization effects0.5 (500 ppm) and 0.7 (700 ppm) selectable EC to TDS conversion factorsSingle point automatic calibration using Quick Cal standard or 1.41 mS/cm in standard calibration mode250 hour battery lifeOrdering Information: HI-98318 GroLine EC/TDS meter is supplied with protective cap, (4) HI-50036 Quick Cal Calibration Sachets (20 ml), (1) CR2032 battery, instruction manual, and quality certificate.Accuracy EC±2% F.S.Dimensions160 x 40 x 17 mm (6.3 x 1.6 x 0.7“)Environment0 to 50°C (32 to 122°F); RH max 100%Range Conductivity0.00 to 6.00 mS/cmRange TDS0 to 3000 ppm (500 CF); 0 to 3999 ppm (700 CF)Resolution Conductivity0.01 mS/cmResolution TDS10 ppm (mg/L)TDS Accuracy±2% F.S.TDS Conversion Factor0.5 (500 ppm) or 0.7 (700 ppm)Temperature Accuracy±0.5°C /±1°FTemperature Compensationautomatic from 0 to 50°C (32 to 122°F)Temperature Range0.0 to 50.0°C / 32.0 to 122.0°FTemperature Resolution0.1°C / 0.1°FWeight75 g (2.6 oz.)
Marine Salinity tester (tilaustuote)
Marine Salinity tester (tilaustuote)
133.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)Designed to bring simplicity to salinity testing during the any process, the HI-98319 Marine Salinity Tester measures conductivity (EC) to determine the salinity of natural and artificial seawater. Within seconds, the salinity and temperature are digitally displayed on the LCD.Displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity (S.G.).Comes with all the necessary solutions and batteries- everything you need to get started measuring right away.Ideal for testing salinity in aquariums, field, and industrial settings.Ordering Information:Each meter is supplied with: CR2032 battery (inside the meter), Storage / Protection sleeve, Instruction manual, Quality certificate, and 35.00 ppt calibration standard sachet (4 pcs.)Warranty: One year. Accuracy (@25°C/77°F)±1 ppt for 0.0 to 40.0 ppt; ±2 ppt for readings over 40.0 ppt ±1 PSU for 0.0 to 40.0 PSU ; ±2 PSU for readings over 40.0 PSU ±0.001 S.G.Battery Type / LifeCR2032 3V Li-Ion (1 pc.)/ approximately 100 hours of continuous useCalibrationautomatic, single point 35.00 pptEnvironment0 to 50 °C (32 °C to 122 °F); RH max 100%Methodppt - International Oceanographic Tables PSU - Standard Methods for the Examination of Water and Wastewater, 2510 B, Electrical Conductivity Method S.G.- Standard Methods for the Examination of Water and Wastewater, 2510 C, Density MethodRange0.0 to 70.0 ppt (g/L) 0.0 to 70.0 PSU 1.000 to 1.041 S.G.Resolution0.1 ppt (g/L) 0.1 PSU 0.001Temperature Accuracy @ 25°C/77°F±0.5°C; 1°FTemperature Compensationautomatic from 5 to 50.0 ºCTemperature Range0.0 to 50.0°C; 32.0 to 122.0°FTemperature Resolution0.1°C; 0.1°FWeight68 g (2.4 oz.) without battery
pH/Temp Tester pHep® (tilaustuote)
pH/Temp Tester pHep® (tilaustuote)
94.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)The Hanna Instruments HI98107 pHep® pH tester is a rugged and reliable pocket-sized tester for use in the lab or field. This modern looking meteris only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. This tester keeps things simple with a two-button operation; one for ON/OFF, the other for Calibration.Features/Benefits:Slim, Ergonomic DesignWith rounded edges and a case that is only 17 mm (0.7”) thick, the HI98107 is thin and fits comfortably in the hand or pocket.Large Multi-level LCDThe LCD is 29 mm (1.125”) x 20 mm (0.81”) allowing the user to easily read both the pH and temperature simultaneously.Two-button OperationOne for ON/OFF, the other for calibration.Integrated Temperature SensorBuilt in temperature sensor allows for temperature compensated measurements. Temperature can be displayed in either oC or oF.Automatic CalibrationAutomatic calibration to one or two points using standard buffers (pH 4.01, 7.01 and 10.01). Stability IndicatorA clock tag stability indicator will disappear to alert the user when the reading is stable.Automatic Shut-offUser-selectable time until meter shuts off to conserve battery life. Options are 8 min, 60 min or disabled.Low Battery IndicatorLow battery indicator that is displayed when less than 10% battery life is remaining.Battery % Level at StartupAt start-up, all the LCD segments are displayed for 1 second, then the percent indication of the remaining battery life is displayed.Ordering Information: The HI98107 is supplied with protective cap, CR2032 battery, instrument quality certificate and instructional manual. Warranty: 1 year (probe 6 months)Auto-offafter 8 minutes, 60 minutes, disabledBattery Type / LifeCR2032 3V Li-Ion (1 pc.) / approximately 800 hours of useDimensions160 x 40 x 17 mm (6.3 x 1.6 x 0.7“)Environment0 to 50°C (32 to 122°F); RH max 100%pH Accuracy±0.1 pHpH CalibrationAutomatic, one or two pointspH Range0.0 to 14.0 pHpH Resolution0.1 pHTemperature Accuracy±0.5°C /±1°FTemperature Compensationautomatic from 0 to 50°C (32 to 122°F)Temperature Range0.0 to 50.0°C / 32.0 to 122.0°FTemperature Resolution0.1°C / 0.1°FWeight65 g (2.3 oz.) without battery
pH/EC/TDS/Temp tester GroLine (tilaustuote)
pH/EC/TDS/Temp tester GroLine (tilaustuote)
256.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)The HI-98131 is a slim, lightweight, and pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. Themeter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).Features at-a-glance3 sensors in a single meter: pH electrode with extractable junction, Amperometric EC/TDS sensor, Exposed temperature probe for faster EC/TDS readingsWaterproof: Designed to withstand the humidity of a growing environmentWide pH Range: pH range is from 0.00 to 14.00 pHSelectable EC to TDS conversion factor:Choice of either a 0.5 or 0.7 conversion factor0.5 (500 CF) conversion factor is for an EC reading of 1000 ?S/cm = 500 ppm0.7 (700 CF) conversion factor is for an EC reading of 1000 ?S/cm = 700 ppmAutomatic Temperature CompensationAll readings are compensated for variations in temperature. Temperature displayed in oC along with pH, EC or TDS reading Stability indicator: Meter displays a clock tag that will disappear when the reading has achieved stability HOLD button: Freezes reading on the display to allow recording of measurementBEPS (Battery Error Prevention System: Meter will automatically shut off if there is not enough power to get an accurate measurementAuto-off: Selectable time before meter will automatically shuts off to conserve battery life. Options are after 8 minutes, 60 minutes , or disabled.Ordering Information: HI-98131 is supplied with HI-73127 pH electrode, HI-73128 electrode removal tool, batteries (4), instructions and quality certificate.Data sheet:Accuracy EC±2% F.S.Accuracy TDS±2% F.S.Auto-offafter 8 minutes, 60 minutes, disabledBattery Type / Life1.5V (4) / approx. 100 hours of continuous use, auto-off after 8 minutes of non-useDimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0’’)EC/TDS Calibrationautomatic, one-point at 1.41 mS/cm or 5.00 mS/cm; one point calibration using quick calibration solutionEnvironment0 to 50°C (32 to 122°F); RH max 100%pH Accuracy±0.1 pHpH Calibrationautomatic, at one or two points using standard buffers (pH 4.01, 7.01,10.01); one point calibration using quick calibration solutionpH Range0.00 to 14.00 pHpH Resolution0.01 pHRange Conductivity0.00 to 6.00 mS/cmRange TDS0 to 3000 ppm (500 CF); 0 to 3999 ppm (700 CF)Resolution EC0.01 mS/cmResolution TDS10 ppm (mg/L)TDS Conversion Factor0.5 (500 ppm) or 0.7 (700 ppm)Temperature Resolution0.1°C / 0.1°FTemperature Accuracy±0.5°C /±1°FTemperature Range0.0 to 60.0°C / 32.0 to 140.0°FWeight100 g (3.5 oz.)
pH/ORP/Temp tester (tilaustuote)
pH/ORP/Temp tester (tilaustuote)
349.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)Combo pH/ORP/Temperature Tester HI-98121Waterproof and it floats!HANNA’s exclusive cartridge pH and ORP electrodeExtendable cloth pH junctionAutomatic Temperature CompensationAutomatic calibrationBattery % Level at startup and stability indicatorHOLD functionHI98121 is a waterproof meter that measures pH, ORP and temperature. The housing of this tester has been completely sealed against humidity and are designed to float.Electrode replacement with the stainless steel round connector means there are no pins to bend or break during replacement.When the cloth junction becomes clogged and response time is sluggish, simply pull out 3 mm (1/8”) to clear the clogging which will improve response time and stability.The exposed stainless steel temperature sensor on these models facilitates faster and more accurate temperature measurement.Order Information:HI 98121 (ORP/pH) is supplied with HI 73127 pH electrode, HI 73128 electrode removal tool, batteries and instructions.Valmistajan tuotesivuAccuracy mV±2 mVAccuracy pH±0.05 pHAccuracy Temperature±0.5°C / ±1°FBattery Type / Life4 x 1.5V with BEPS / approx. 250 hours of continuous use; auto-off after 8 minutes of non-useCalibration mVfactory calibratedCalibration pHautomatic, at 1 or 2 points with 2 sets of memorized buffers(pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18)Dimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0")ElectrodeHI 73127 replaceable pH electrode (included); fixed ORP sensorEnvironment-5 to 50°C (23 to 122°F); RH max 100%Range mV±1000 mVRange pH-2.00 to 16.00 pHRange Temperature-5.0 to 60.0°C / 23.0 to 140.0°FResolution mV1 mVResolution pH0.01 pHResolution Temperature0.1°C / 0.1°FTemperature CompensationAutomatic for pH readingsWeight100 g (3.5 oz.)
pH/EC/TDS/Temp tester low range EC (tilaustuote)
pH/EC/TDS/Temp tester low range EC (tilaustuote)
256.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)pH/Conductivity/TDS Tester low range EC measurement HI-98129Waterproof and designed to floatCloth, renewable junctionClose proximity temperature probeAutomatic Temperature CompensationAutomatic 1 or 2 point pH calibrationTactile grip casingsHOLD functionBEPS (Battery Error Prevention System)Battery % displayed at startupAutomatic shut-offEfficient two button operationTemperature in °C or °F; Easily switch between Celsius and Fahrenheit readouts.HI 98129 is a waterproof tester that offers high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. This floating, waterproof combination tester has an easy to read, LCD and an automatic shut-off. pH and EC/TDS readings are automatically temperature compensated.This tester features a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode. The extendable cloth junction provides an extended electrode life and the replaceable pH cartridge means that this tester does not need to be thrown away when the pH sensor is exhausted.The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (?).Fast, efficient, accurate and portable, the Combo pH, EC/TDS and temperature tester combines all the features users have requested and more!Order Information:HI98129 (Combo) is supplied with HI 73127 pH electrode and HI 73128 electrode removal tool, batteries and instructions.Accuracy EC/TDS±2% F.S.Accuracy pH±0.05 pHAccuracy Temperature±0.5°C / ±1°FBattery Type / Life4 x 1.5V / approx. 100 hours of continuous use;auto-off after 8 minutes of non-useCalibration EC/TDSautomatic, 1 pointCalibration pHautomatic, 1 or 2 points with 2 sets of memorized buffers(pH 4.01 / 7.01 / 10.01 or 4.01 / 6.86 / 9.18)Dimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0")Environment0 to 50°C (32 to 122°F); RH max 100%pH ElectrodeHI 73127 (replaceable; included)Range EC0 to 3999 µS/cmRange pH0.00 to 14.00 pHRange TDS0 to 2000 ppmRange Temperature0.0 to 60.0°C / 32 to 140.0°FResolution EC1 µS/cmResolution pH0.01 pHResolution TDS1 ppmResolution Temperature0.1°C / 0.1°FTDS Conversion Factoradjustable from 0.45 to 1.00Temperature CompensationpH^ automatic; EC/TDS^ automatic with ß adjustable from 0.0 to 2.4% / °C
pH/EC/TDS/Temp tester High range EC (tilaustuote)
pH/EC/TDS/Temp tester High range EC (tilaustuote)
256.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)pH/Conductivity/TDS Tester high range EC measurement HI-98130Waterproof and designed to floatCloth, renewable junctionClose proximity temperature probeAutomatic Temperature CompensationAutomatic 1 or 2 point pH calibrationTactile grip casingsHOLD functionBEPS (Battery Error Prevention System)Battery % displayed at startupAutomatic shut-offEfficient two button operationTemperature in °C or °F; Easily switch between Celsius and Fahrenheit readouts.HI 98130 is a waterproof tester that offers high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. This floating, waterproof combination tester has an easy to read, LCD and an automatic shut-off. pH and EC/TDS readings are automatically temperature compensated.This tester features a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode. The extendable cloth junction provides an extended electrode life and the replaceable pH cartridge means that this tester does not need to be thrown away when the pH sensor is exhausted.The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (?).Fast, efficient, accurate and portable, the Combo pH, EC/TDS and temperature tester combines all the features users have requested and more!Order Information:HI98130 (Combo) is supplied with HI 73127 pH electrode and HI 73128 electrode removal tool, batteries and instructions.Accuracy EC/TDS±2% F.S.Accuracy pH±0.05 pHAccuracy Temperature±0.5°C / ±1°FBattery Type / Life4 x 1.5V / approx. 100 hours of continuous use;auto-off after 8 minutes of non-useCalibration EC/TDSautomatic, 1 pointCalibration pHautomatic, 1 or 2 points with 2 sets of memorized buffers(pH 4.01 / 7.01 / 10.01 or 4.01 / 6.86 / 9.18)Dimensions163 x 40 x 26 mm (6.4 xEnvironment0 to 50°C (32 to 122°F); RH max 100%pH ElectrodeHI 73127 (replaceable; included)Range EC0.00 to 20.00 mS/cmRange pH0.00 to 14.00 pHRange TDS0.00 to 10.00 pptRange Temperature0.0 to 60.0°C / 32 to 140.0°FResolution EC0.01 mS/cmResolution pH0.01 pHResolution TDS0.01 pptResolution Temperature0.1°C / 0.1°FTDS Conversion Factoradjustable from 0.45 to 1.00Temperature CompensationpH^ automatic; EC/TDS^ automatic with ß adjustable from 0.0 to 2.4% / °C
pH tester Checker® Plus (tilaustuote)
pH tester Checker® Plus (tilaustuote)
74.00€ 0
(Tilaustuote, varmista toimitusaika asiakaspalvelusta)The HI98100 Checker Plus pH tester has been designed with many advanced features while maintaining the look and feel of the original Checker. The Checker Plus now offers automatic calibration to one or two points, automatic buffer recognition, calibrated buffer tags, stability indicator, low battery indicator, and selectable automatic shut off. The Checker plus still maintains the iconic pentagon design with a probe that measures 103 mm in length and tapered to a 8 mm diameter making it ideal for test tubes and vials.Features at-a-glance:Economical – The Checker Plus is a full-featured pH tester at a price that anyone that needs to measure pH can afford.Large LCD - Enhanced LCD that displays reading, stability indicator, low battery indicator and calibration tags.Replaceable pH Electrode - The HI1271 supplied gel filled pH electrode is 103 mm long and tapers to an 8 mm diameter at the sensing end. This narrow electrode easily fits into test tubes, vials, and other containers with small opening.Automatic Calibration - The Checker Plus is calibrated automatically to one or two points. The calibration buffers are automatically recognized and after calibration the buffer values used are shown on the display as a tag.Stability Indicator – An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilized the indicator disappears and a reading can be recorded.Automatic Shut-Off – The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto off feature can be disabled.Long Battery Life - The Checker Plus has an exceptional long battery life of approximately 1000 hours. When the battery power is running low a low battery indicator is displayed.Plastic Carrying Case – The HI98100 Checker Plus is supplied complete with meter, probe, calibration solutions and cleaning solutions packaged in a durable plastic carrying case.Ordering Information: HI98100 is supplied with HI1271 pH electrode, HI70004 pH 4.01 buffer solution sachets (2 x 20 mL), HI70007 pH 7.01 buffer solution sachets (2 x 20 mL), HI700601 electrode cleaning solution sachets (2 x 20 mL), instruction manual, instrument quality certificate and plastic carrying case.Battery Type / Life1.5V CR2032 (1) / approximately 1000 hours of continuous useCalibrationautomatic, one or two points with three standard buffers available (pH 4.01, 7.01 and 10.01)Dimensions50 x 174 x 21 mm (2 x 6.8 x 0.9”)Electrode/ProbeHI1271 pH electrode with screw type connector (included)Environment0 to 50°C (32 to 122°F); RH max 95%pH Accuracy±0.2 pHpH Range0.00 to 14.00 pHpH Resolution0.01 pHWeight50 g (1.8 oz.)
Loading...